Motorola MTP3100 User Manual Download Page 54

Page: 54 / 132

Menu Icon

Description

Setup

Allows you to customize your radio.

Group Setup

Contains additional menu items for Scanning Talkgroups features.

My Info

Displays information about your radio and its numbers.

Recent Calls

Contains a list of recent calls.

RUI

Allows you to log in and log out of the radio.

Networks

Allows you to select a network.

Packet Data

Allows you to send data from your radio to other devices.

Services

Allows you to manage Broadcast, Assistance, and Disaster Calls.

4.3

Messages

This feature allows you to send and receive text messages. A message can contain up to 1000
characters, depending on your service provider settings.

Pressing the

PTT

button when a message is highlighted can cause one of the following actions,

depending on your service provider settings:

• The radio ignores the

PTT

button request.

• The radio starts a Private Call with the message sender.

• The radio starts a Group Call on a currently selected talkgroup.

See

Writing Text on page 112

for details on writing a text message.

4.3.1

New Message

This menu item allows you to create a new message.

NOTICE:

While editing a text, Status Icons change their appearance and only four of them are

displayed: Tower, Signal Strength, Emergency, and Battery.

68015000897–FC
Chapter 4: Main Menu

Send Feedback

Summary of Contents for MTP3100




































































































































Search results

Summary of Contents for MTP3100

Reviews:

Brands by name

Popular brands

Motorola MTP3100, User Manual

Search results

Summary of Contents for MTP3100

Reviews:

Brands by name

Popular brands