manualshive.com logo in svg

Motorola M-CORE MMC2001 Series, Reference Manual

The Motorola M-CORE MMC2001 Series Reference Manual is the ultimate guide to unlocking the full potential of your device. This comprehensive manual provides step-by-step instructions and valuable tips to ensure optimal performance. Download this manual for free from our website today to maximize your Motorola experience.

Share
Download
background image

MMC2001

UNIVERSAL ASYNCHRONOUS RECEIVER/TRANSMITTER MODULE

MOTOROLA 

REFERENCE MANUAL

11-1 

SECTION 11

UNIVERSAL ASYNCHRONOUS RECEIVER/TRANSMITTER MODULE

11.1 Overview

The universal asynchronous receiver/transmitter (UART) module provides asynchro-
nous serial communication with external devices such as modems and other comput-
ers. The UART module consists of two independent and almost identical channels.
The description of a single channel in this section applies to both UART0 and UART1,
with the exception of the CTS and RTS pin functions. These are available only for
UART0.

Some of the key features of the UART channels are:

• Full-duplex operation
• Direct support of Infrared Data Association mechanism
• Robust receiver data sampling with noise filtering
• 16-entry FIFOs for transmit and receive
• 7- or 8-bit operation with optional even or odd parity and one or two stop bits
• Generation and detection of break
• 16x bit clock generator for bit rates of 300 bps to 115.2 Kbps 
• Three maskable interrupts
• RTS interrupt with wake up from stop capability
• Low-power modes

The UART performs all normal operations associated with “start-stop” asynchronous
communication. Serial data is transmitted and received at standard bit rates using the
internal 16x bit clock generator. 

 

   

  

Freescale Semiconductor,

 I

                                               

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

nc.

..

Summary of Contents for M-CORE MMC2001 Series




































































































































































































































































Reviews:

No comments

Related manuals for M-CORE MMC2001 Series

S&C 5800 Series Troubleshooting Manual preview
5800 Series
Brand: S&C Pages: 34
iCeeO2 C30 Instruction Manual preview
C30
Brand: iCeeO2 Pages: 7
GE 400 Series Installation Instructions preview
400 Series
Brand: GE Pages: 2
SOMFY Situo 1 RTS Installation And Operating Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 112
ACL ACL 5500 Installation Manual preview
ACL 5500
Brand: ACL Pages: 20
Auber WS-1500FXL Operation & Instruction Manual preview
WS-1500FXL
Brand: Auber Pages: 3
ASROCK iEP-5000G Series Quick Installation Manual preview
iEP-5000G Series
Brand: ASROCK Pages: 2
Fairford Synergy SGY-101 Quick Start Manual preview
Synergy SGY-101
Brand: Fairford Pages: 20
ST UM1932 User Manual preview
UM1932
Brand: ST Pages: 40
Varian 969-9507 Instruction Manual preview
969-9507
Brand: Varian Pages: 37
Danfoss VLT MCD 201 Installation Manual preview
VLT MCD 201
Brand: Danfoss Pages: 36
GIESSE RACK MAX 650 Instruction And Installation Manual preview
RACK MAX 650
Brand: GIESSE Pages: 136
Toho Electronics TTM-339 Operation Manual preview
TTM-339
Brand: Toho Electronics Pages: 32
Danfoss AVT/VG Operating Manual preview
AVT/VG
Brand: Danfoss Pages: 16
LOVATO ELECTRIC DCRJ Addendum preview
DCRJ
Brand: LOVATO ELECTRIC Pages: 18
Z-Wave Alliance SR-ZV9002T4-CCT-RU Manual preview
SR-ZV9002T4-CCT-RU
Brand: Z-Wave Alliance Pages: 10
NI RMC-8355 User Manual preview
RMC-8355
Brand: NI Pages: 135
Zareba LIS10 User Manual preview
LIS10
Brand: Zareba Pages: 40

Brands by name

Popular brands

Load more brands