Motorola HH1620 User Manual Download Page 11

Page: 11 / 88

Overview

Installation With an Existing Router

Unplug your cable or DSL modem power cord or adapter.

Unplug your router power cord or adapter. Please leave your modem and router connected to the
cable or phone line that provides your Internet connection.

Disconnect one computer from your router.

Connect one end of the blue Ethernet cable to an Ethernet port on your router.

Connect the other end of the blue E

thernet cable to the blue Ethernet port labelled

Internet

on the

Plug your cable or DSL modem power cord or adapter into an AC power outlet. Refer to the

vided by the modem manufacturer. For example,

startup for a Motorola SURFboard cable modem is complete when its Power, Receive, Send, and

uter to complete its start-up process. Refer to the instructions provided with the router.

r voice gateway to the

Power

connector on its rear

rear panel of your voice gateway.

Connect one end of the yellow Ethernet cable to the

Ethernet 1

port on your voice gateway.

Connect the other end of the yellow Ethernet cable to the Ethernet port on the computer you
disconnected in step 3.

instructions provided with the modem.

IMPORTANT:

Before you continue, be sure to allow enough time for your modem to complete its

start-up process. Refer to the information pro

Online lights are on and no longer flashing.

Plug your router power cord or adapter into an AC power outlet. Be sure to allow enough time for
your ro

10.

Connect the power adapter supplied with you

HH1620 Wireless VoIP Gateway
User’s Guide

Summary of Contents for HH1620

























































































Search results

Summary of Contents for HH1620

Reviews:

Related manuals for HH1620

Brands by name

Popular brands

Motorola HH1620, User Manual

Search results

Summary of Contents for HH1620

Reviews:

Related manuals for HH1620

Brands by name

Popular brands