Motorola Canopy T1/E1 User Manual Download Page 50

Page: 50 / 73

Canopy

T1/E1

Multiplexer

September

2004

T1/E1

Multiplexer

FPGA

Version

3.4

Page

50 of 73

Procedure 18: Configuring E1 line coding using the EMS

Follow these steps to configure line coding from the EMS.

1. From main menu EMS, select the Configuration (

Config

) option.

2. Select

Configure E1

RESULT:

The E1 Config dialogue box opens.

3. Click

↓

RESULT:

The dropdown list to specify the coding technique E1 channel opens.

4. Click on the appropriate line coding technique for the E1channel being

configured.

NOTE:

You must select a coding technique: either

HDB3

AMI

5. Click on the tab for the next Channel to configure line coding for channel.

NOTE:

If the system has been reset, clicking the

Refresh

button will replace the

displayed values with currently-programmed values.

6. To configure the line coding technique for each other channel, repeat Steps 3

and 4.

7. Select

Close

to close the dialogue box once all channels are configured.

RESULT:

You are returned to the EMS main menu.

end of procedure

2.5.5

Configure

Ports

Procedure 19: Configuring the Ethernet ports using the EMS

Follow these steps to configure the Ethernet ports using the EMS

1. From the Main Menu, select the pull-down menu

Config

→

Ethernet.

RESULT:

The Ethernet Configuration dialogue box opens.

2. Indicate the appropriate choices by clicking on the appropriate radio buttons.

NOTE:

If you select

Auto Negotiation

Off

, the Ethernet port will be forced to 100

Mbps full duplex.

3. When the Ethernet configuration is complete, click

end of procedure

Procedure 20: Configuring the T1 ports using the EMS

Follow this procedure to configure the T1 ports from the EMS.

1. From the pull-down menu, Select

Config

→

RESULT:

The T1 Config dialogue box opens.

2. Click

↓

for

Length

RESULT:

The dropdown list to specify the cable length for the T1 channel opens.

3. Click on the appropriate line length for the T1 being configured.

NOTE:

An improper length can result in decreased line quality or echo.

Issue

Summary of Contents for Canopy T1/E1










































































Search results

Summary of Contents for Canopy T1/E1

Reviews:

Related manuals for Canopy T1/E1

Brands by name

Popular brands

Motorola Canopy T1/E1, User Manual

Search results

Summary of Contents for Canopy T1/E1

Reviews:

Related manuals for Canopy T1/E1

Brands by name

Popular brands