Canopy
T1/E1
Multiplexer
September
2004
T1/E1
Multiplexer
FPGA
Version
3.4
Page
13 of 73
Figure 5: Rear panel with optional
−
48 v power supply adapter for battery backup
The recommended sequence of connection is:
1. Connect a PBX or TDM CPE to the T1/E1 port(s). (See
Figure 2
on Page
11
.)
2. Connect the Ethernet cable from the Canopy Backhaul Module to the jack
labeled Canopy. (See
Figure 2
on Page
11
.)
3. Connect the selected power adapter to the T1/E1 Multiplexer. (See
Figure 3
and
Figure 4
.)
4. Power the T1/E1 Multiplexer on. (See
Figure 3
.)
5. As required to configure the T1/E1 Multiplexer, connect a notebook computer to
the jack labeled CONTROL on the front panel of the T1/E1 Multiplexer. (See
Figure 6
.)
Issue
3
