Motorola CA50, Developer & User Manual

Page: 485 / 542

Appendix F Rapid Deployment
Overview
The Rapid Deployment (RD) client on the CA50 client is used to scan staging bar codes. For details about the
parameters contained within the RD bar codes, see
Staging and Deploying CA50s on page 12-2 .
Accessing the Rapid Deployment Client
When the CA50 powers on for the first time, out-of-box, the CA Menu (see CA Menu on page 3-12 ). The default,
highlighted selection on the CA Menu at the first power on is Rapid Deployment (see Figure F-1 ).
Scanning Rapid Deployment Bar Codes
To stage a CA50 over a wireless connection:
1.
Ensure the UCA server setup is complete and ready to deploy data to the UCA client. (See UCA Server
Requirements and Setup on page 6-7 .)
2.
Ensure the CA50 battery is fully charged (see Charging Batteries on page 3-8 ).
3.
Power on the CA50 (see Powering On the CA50 - Pre-deployment on page 3-11 )
Figure F-1
CA Menu Window
4.
To select and launch the Rapid Deployment option from the CA Menu, use the Up and Down keys to highlight
the Rapid Deployment application; press the Select (S) key to launch the application.
NOTE 1. For a complete checklist outlining all the development and deployment activities required to implement
a CA50 solution, see the Development and Deployment Checklist on page 2-1 .
2. For a table listing the most commonly requested topics within this manual, see the Quick Startup Guide
on the last page of the manual.
Start
Rapid Deploy
Programs
Settings
System info
CA Menu
ment