Performing Installation Tasks
526359-001
MGBI
2-13
Figure 2-8 Connecting Cables to the SFP Module
Connecting a Cable to the T1/E1 BITS Interface
The BSR 2000 provides a Building Integrated Timing Supply (BITS) interface to
recover the timing reference from either a T1 or E1-based BITS source. The BITS
port, color-coded with a gold label, uses a shielded RJ-48 connector with a Shielded
Twisted Pair (STP) cable. To connect a cable to the BITS interface, follow these steps.
1.
Connect a male RJ-48 connector to the BITS interface port. See
2.
Connect the opposite end of the network cable to a T1 or E1-based BITS source.
bsr2k024
To Ethernet router,
switch, or hub
2
3
4
5
1
Bits
RED
0
