Performing Installation Tasks
526359-001
MGBI
2-21
To connect the BSR 2000 to a power source, follow these steps:
1.
Make sure the BSR 2000 power switch is in the Off (
O
) position. See
.
2.
Connect the AC power cord to the power receptacle located on the rear panel of
the BSR 2000.
3.
Connect the other end of the power cord to the AC power outlet.
4.
To apply power to the BSR 2000, press the BSR 2000 power switch to the On (
I
)
position.
Figure 2-15 Connecting a Power Cable to the BSR 2000
Determining Successful Booting
After powering on the BSR 2000, observe the LEDs on its front panel. The LED
display varies until the BSR 2000 is booted. When the booting process completes, the
LEDs should display as follows:
■
The System Status LED is green
■
All per-port Status LEDs are green
bsr2k009
To AC power source
