Motorola AT Commands G24-L Developer'S Manual Download Page 53

Page: 53 / 444

Chapter 1: Product Features

April 15, 2008

G24-L AT Commands Reference Manual

1-23

This command displays the default user profile.

Page 3-224

+CMER

This command enables an external accessory to receive key press
information from the G24-L’s internal keypad.

Page 3-225

+CLAN

This command handles the selection of language in the ME.

Page 3-225

+CIND

This command is used to query the status of various ME indicators.

Page 3-227

Unsolicited UI Status Messages

+CIEV

An unsolicited indication regarding various phone indications that is
sent to the DTE when the <ind> parameter of the +CMER command
is set to 1.

Page 3-229

GPRS

GPRS Commands

+CGCLASS

This command sets the GPRS mobile station class.

Page 3-231

+CGDCONT

This command specifies the PDP (Packet Data Protocol) context.

Page 3-232

+CGQMIN

This command sets the minimum acceptable quality of service
profile.

Page 3-234

+CGQREQ

This command displays the requested quality of service profile.

Page 3-236

+CGATT

This command attaches the G24-L to the GPRS network.

Page 3-237

+CGPADDR

This command reads the allocated PDP addresses for the specified
context identifiers.

Page 3-238

+MGEER

This command returns the PDP context activation reject cause.

Page 3-240

D*99

This command enables the ME to perform the actions necessary for
establishing communication between the terminal and the external
PDN.

Page 3-242

+CGPRS

This command indicates whether there is GPRS coverage.

Page 3-244

+CGACT

This command activates/deactivates the PDP Context.

Page 3-237

STK Commands

+MTKR

This command displays the profile that is downloaded from the
G24-L to the SIM during the SIM initialization process.

Page 3-247

+MTKE

This command enables/disables the SIM ToolKit functionalities.

Page 3-257

+MTKP

This is both a command and an unsolicited event. The command
responds to an unsolicited event.

Page 3-258

+MTKM

This is both a command and an unsolicited event. The command
selects items from the menu.

Page 3-272

+MTKC

This unsolicited event notifies the terminal when supplementary
services, SMS Control or Call Control are modified.

Page 3-274

+MTKA

This command sends acknowledge response from the user (TE) to
the STK.

Page 3-274

Table 1-1: AT Commands (Cont.)

AT Command

Description

Page

Summary of Contents for AT Commands G24-L





























































































































































































































































































































































































































































Search results

Summary of Contents for AT Commands G24-L

Reviews:

Related manuals for AT Commands G24-L

Brands by name

Popular brands

Motorola AT Commands G24-L, Developer'S Manual

Search results

Summary of Contents for AT Commands G24-L

Reviews:

Related manuals for AT Commands G24-L

Brands by name

Popular brands