background image

Network

3-122

 G24-L AT Commands Reference Manual

April 15, 2008

Example

AT+CGREG=?

+CGREG: (000-002)

OK

AT+CGREG=2

OK

AT+CGREG?

+CGREG: 002,001,2648,988b

OK

AT+CGREG=1

OK

AT+CGREG?

+CGREG: 001,001

OK

AT+CGREG=0

OK

//Example for unsolicited reports:

AT+CGREG=1

OK

AT+CGATT=0

OK

+CGREG: 000

AT+CGATT=1

OK

+CGREG: 002

+CGREG: 001

//Remove GPRS enabled SIM

+CGREG: 000

//Insert GPRS enabled SIM

+CGREG: 002

+CGREG: 001

+COPS, Operator Selection

This command enables accessories to access the network registration information, and the 
selection and registration of the GSM network operator. The G24-L is registered in the Home 
network. 

The Enhanced Operator Name String (EONS) feature enables the G24-L to return the operator 
name displayed on the handset. This feature allows the SIM card to store a mapping of 
MCC/MNC code pairs to the displayed operator name. As a result, several operators can share a 
single network while having their handsets display their own name as the network operator.

Testing the enhanced ONS feature requires a "SIM ONS" SIM card.

Summary of Contents for AT Commands G24-L





























































































































































































































































































































































































































































Reviews: