Motorola APX N50 User Manual Download Page 72

Page: 72 / 106

15.3.1

Turning Bluetooth On or Off

Procedure:

Press the

menu item.

Press

Status

Perform one of the following actions:

• To turn on Bluetooth, press

• To turn off Bluetooth, press

Off

15.3.2

Searching and Pairing the Bluetooth Device

Prerequisites:

Ensure that the Bluetooth on your device is turned on and set to

Discoverable

in order

to enable your radio to detect your device in Bluetooth.

Procedure:

Press the

menu item.

Press

Search Devices

→

To pair with an available device, select the required device and press

Sel

The radio pairs to the device.

15.3.3

Turning Bluetooth Audio On or Off

NOTE:

Bluetooth audio routing can be configured in the Customer Programming Software

(CPS) to route the audio to the radio internal speaker. The audio routes to the radio speaker
if the radio Remote Speaker Microphone (RSM) is not connected. Check with your system
administrator for more information on programming this feature.

Procedure:

Press the

menu item.

Press

Bluetooth spkr

Perform one of the following actions:

• To turn on Bluetooth audio, press

• To turn off Bluetooth audio, press

Off

15.3.4

Viewing and Clearing the Bluetooth Enabled Device Information

Procedure:

Press the

menu item.

Press

Devices

→

Sel

To view if a device is paired or connected, view the status a device from the list of

<Device

Friendly Name>

If there are no active Bluetooth devices being paired or connected, the display shows

devices

MN009203A01-AA
Chapter 15 : Connectivity

Summary of Contents for APX N50










































































































Search results

Summary of Contents for APX N50

Reviews:

Motorola APX N50, User Manual, Page: 72 / 106

Search results

Summary of Contents for APX N50

Reviews: