manualshive.com logo in svg

Motorola APX N50, User Manual, Page: 57 / 106

Share
Download
Motorola APX N50 User Manual Download Page 57

Option

Actions

Exiting Emergency operation initiated by
other radios

a

Press and hold the 

1-Dot Programma-

ble button

.

b

Press the 

Top (Orange)

 button.

Exiting Emergency operation initiated by
the Supervisor

Perform one of the following actions:

- Press and hold the 

Top (Orange)

 button.

- Press and hold the 

1-Dot Programma-

ble button

. Press the 

Top (Orange)

 but-

ton.

- Wait for the console to clear the Emer-

gency.

NOTE: 

Your radio supports the following button combinations:

- Radio 

1-Dot Programmable button

 and 

Top (Orange)

 button.

- Radio 

1-Dot Programmable button

 and accessory 

Orange

 button.

- Radio 

Top (Orange)

 button and accessory 

1-Dot Button

- Accessory 

1-Dot Button

 and accessory 

Orange

 button.

• To exit the emergency via console (Trunking only), the dispatch operator or supervisor must

clear the emergency.

NOTE: 

Radios configured as console only are not able to cancel emergency mode from

the radio.

8.5

Emergency Keep-Alive

This feature prevents the radio from being turned off when it is in Emergency mode. If this feature is
enabled, you are required to exit Emergency mode before turning off your radio.

8.6

Emergency Beacon

When the radio is in Emergency mode, the Emergency Beacon feature transmits Bluetooth Low
Energy (BTLE) signals and other Emergency information to nearby radios.

Contact your system administrator for more information.

8.6.1

Sending Emergency Beacons

The following method allows you to transmit the beacon.

Procedure:

Press the programmed 

Top (Orange)

 button.

MN009203A01-AA

Chapter 8 :  Emergency Operation

  51

Summary of Contents for APX N50











































































































Reviews:

No comments