Motorola APX N50 User Manual Download Page 49

Page: 49 / 106

5.16

Digital PTT ID Support

This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving
a transmission. The receiving radio and the dispatcher can view the ID, which consists of up to a
maximum of eight characters.

The ID number of your radio is also automatically sent every time you press the

PTT

button. This

feature is preprogrammed per channel. For digital voice transmissions, the ID of your radio is sent
continuously during the voice message.

5.17

General Radio Information

This menu item allows you to view general information of your radio.

The available information are:

• Radio Information

• IP Information

• Control Map

• Certificates

• IoT Status

• Voice Commands

5.17.1

Accessing the General Radio Information

Procedure:

Press the

Info

menu item.

Perform one of the following actions:

• To view radio information, press

Radio Info

• To view IP information, press

IP Info

• To view Control Map, press

Control Map

• To view Certificates, press

Certificates

• To view IoT status, press

IoT Status

• To view programmed voice commands, press

Voice Commands

MN009203A01-AA

Chapter 5 : General Radio Operation

Summary of Contents for APX N50










































































































Search results

Summary of Contents for APX N50

Reviews:

Related manuals for APX N50

Brands by name

Popular brands

Motorola APX N50, User Manual

Search results

Summary of Contents for APX N50

Reviews:

Related manuals for APX N50

Brands by name

Popular brands