Motorola APX N50 User Manual Download Page 61

Page: 61 / 106

Chapter 10

Tactical Public Safety (Conventional
Only)

Tactical Public Safety (TPS) enables the member of a group to identify the start and the end of a
transmission by displaying the caller name or ID on the radio display.

10.1

Using TPS Normal Transmission

Procedure:

In the TPS Zone Channel, perform one of the following actions:

• To talk, press and hold the

PTT

button.

• To listen, release the

PTT

button.

• Receive and listen to the call.

The display shows the caller name or ID.

10.2

Using TPS Emergency Transmission

Procedure:

Press the programmed

Top (Orange)

button.

The Emergency Beacon tone sounds.

To call, press and hold the

PTT

button.

To listen, release the

PTT

button.

The Emergency Call De-Key Sidetone sounds. After a short pause, the Emergency Beacon tone
sounds.

To exit or cancel the Emergency mode, press and hold the programmed

Top (Orange)

button.

MN009203A01-AA

Tactical Public Safety (Conventional Only)

Summary of Contents for APX N50










































































































Search results

Summary of Contents for APX N50

Reviews:

Related manuals for APX N50

Brands by name

Popular brands

Motorola APX N50, User Manual

Search results

Summary of Contents for APX N50

Reviews:

Related manuals for APX N50

Brands by name

Popular brands