Motorola APX N50 User Manual Download Page 44

Page: 44 / 106

Chapter 5

General Radio Operation

This chapter explains the general operations of your radio.

5.1

Selecting Zones

A zone is a group of channels.

Procedure:

Press the

Zone

menu item.

Select the required zone and press

Sel

5.2

Selecting Channels

A channel is a group of radio characteristics, such as transmit or receive frequency pairs.

Procedure:

Select channels by using the following options.

Option

Actions

Selecting radio channels using
the Channel Selector knob

Rotate the

Channel Selector

knob to the required

channel.

Selecting radio channels from
the Menu

Press the

Chan

menu item.

Select the required channel and press

Sel

5.2.1

Channel Error Message

If there is a channel error, your radio displays error messages on the Radio Control Widget.

Type

Description

Unprogrammed

The mode is set to an unprogrammed channel.

Fail 001

The selected channel is assigned to an incorrect frequency band.

5.3

Mode Select Feature

Mode Select allows a long press to save the current zone and channel of your radio to a programmable
button, or a softkey. Once programmed, the short-press of that button or softkey changes the
transmission to the saved zone and channel.

NOTE:

Your radio must be programmed for you to use this feature.

MN009203A01-AA
Chapter 5 : General Radio Operation

Summary of Contents for APX N50










































































































Search results

Summary of Contents for APX N50

Reviews:

Related manuals for APX N50

Brands by name

Popular brands

Motorola APX N50, User Manual

Search results

Summary of Contents for APX N50

Reviews:

Related manuals for APX N50

Brands by name

Popular brands