Motorola APEX1000 Installation And Operation Manual Download Page 148

Page: 148 / 335

Configuration • Output TS Configuration

APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual

130

573408-001-a

Output TS Configuration window field definitions

Item

Definition/Range

TS:QAM

The Output Transport Stream numbers (1-16, 17- 32, 33- 48) and Output QAM
channel.

Each field is colored to indicate current alarm status. See

APEX1000 LED Color

Scheme

for more information.

Operating Mode

Use to select the operating mode.

Available options are:

•

Undefined

•

Session Control

•

Manual Routing

•

UDP Mapping

•

DEPI

PID Remapping

This column provides the PID remapping conditions.

Values are:

•

Disabled

•

Without Reuse

(default)

•

Program Based

(for VOD usage)

Caution: Do not change this setting without consulting

PID Re-Mapping

Options

for additional information.

PAT TS ID

The output transport stream ID to use for the output PAT in this output
transport stream. For Session Control, this setting must be unique for each
output stream.

Range: 0 – 65535

MC Encryption Type

This column provides the type of encryption to be used for that TS:QAM.

Values are:

•

None

•

CTE

•

Broadcast

(only applicable to outputs in Manual Routing mode)

SimulCrypt Mode

Use this column to select the SimulCrypt mode.

Values are:

•

None

•

External EIS

Number of
Programs/PIDs/Streams
/SDV

Shows the number of Routed Programs, Ancillary PID Routes, Input Streams,
and SDV Sessions.

Mapping

The drop-down list offers a shortcut to the following Manual Routing tasks:

•

Program Mapping

•

Stream Pass Thru

•

Ancillary PID Mapping

•

UDP Port Mapping

•

DEPI Session Mapping

Summary of Contents for APEX1000
















































































































































































































































































































































Search results

Summary of Contents for APEX1000

Reviews:

Related manuals for APEX1000

Brands by name

Popular brands

Motorola APEX1000, Installation And Operation Manual

Search results

Summary of Contents for APEX1000

Reviews:

Related manuals for APEX1000

Brands by name

Popular brands