13.Fall sensor
14.Side stand
Cylinders synchronisation
•
With engine off, connect the Axone
2000 tool to the diagnosis connector
and to the vehicle battery.
•
Turn on the scanner.
•
Screw the joints connecting the vacu-
ometer pipes on the inlet pipe holes.
•
Connect the vacuometer pipes to the
relative joints.
•
The Axone should display the setting
up adjustments screen page.
•
Make sure the throttle valve is fully in.
•
Autodetect the throttle position.
•
Turn the key to "OFF" and leave it for at least 30 seconds.
DO NOT TOUCH THE THROTTLE ABUTMENT SCREW OR THE THROTTLE BODY MUST BE RE-
PLACED. CHECK THAT THE THROTTLE RETURN CABLE IS NOT TAUT.
V7 Classic
Power supply
P SUPP - 81
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten