TABLE C
Arrange the throttle control transmissions.
TABLE D
Insert the throttle control and starter transmissions
through the cable guide on the steering pipe (4)
and fasten them with a rubber clamp (5).
TABLE E
Turn the steering to the left, clamp the three cables
of the front cable harness with two clamps:
•
the first clamp fixed to the chassis in
the opening;
•
the second, near the headstock.
Central part
CAUTION
ONCE THE ELECTRICAL SYSTEM IS REFITTED, THE CONNECTORS RECONNECTED AND
CLAMPS AND RETAINERS RESTORED, CARRY OUT THE CHECKS INDICATED UNDER "SPE-
CIAL CHECKS FOR THE CORRECT CONNECTION AND LAYING OF CABLES" IN THE "ELEC-
TRICAL SYSTEM INSTALLATION" SECTION.
CENTRAL SECTION
TABLE A - TANK FITTING
•
Place the submersible pump and set the six screws, tightening them in a criss-cross se-
quence to the prescribed torque.
•
Repeat the tightening sequence.
V7 Classic
Electrical system
ELE SYS - 35
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
