•
Slide of the tapered bearing from the
case.
•
Slide off the O-ring.
•
Slide off the spacer.
•
Slide off the two shim washers.
•
Slide off the tapered bearing from the
case.
Checking
•
Check that the pinion toothing is not damaged, worn or deformed; otherwise, replace the
pair.
•
Check that both tapered bearings are not damaged, that the rollers are not damaged or
worn; otherwise, replace them.
•
Check that the adjustment washers are not deformed or broken; otherwise, replace them.
•
Check that the sealing rings are not shattered, spoiled or worn; otherwise, replace them.
Fitting
•
If the bevel pinion should be replaced,
replace also the crown fitted on the
housing. The pinion and the crown
should have the same number stam-
ped.
Chassis
V7 Classic
CHAS - 110
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
