AGITO
25
Motion Impossible Ltd.
www.Motion-Impossible.com
+44 1454 501010
25
AGITO Owners’ Manual v1.3 Firmware r4.13
INSERTING DRIVE-ENDS
Make sure the fixing bolts are removed then insert the drive end into the
chassis. You may need to push firmly for it to slot in.
Screw in tight the two fixing bolts on either side, be careful not to cross-
thread. Where applicable insert the steering pin by pressing down the blue
button and fitting through the holes.
ATTACHING WHEELS TO SPORTS DRIVE-ENDS
Remove the Wheel nut from the shaft
Slide the wheel onto the shaft
Align the hexagons on the wheel and the shaft and slide in
Using the supplied AGITO Wheel Nut Tool to screw on the wheel nut.
Make sure it is tight (but take care not to damage the thread or nut)
to prevent it coming loose whilst in motion.
When inserting the Drive-end, take care of the Steering mechanism.
Ensure the Steering Pin is securely locked in place before operation.
ALWAYS ensure Wheel Nuts are secure, check regularly.
