AGITO
11
Motion Impossible Ltd.
www.Motion-Impossible.com
+44 1454 501010
11
AGITO Owners’ Manual v1.3 Firmware r4.13
3.
AGITO CORE OVERVIEW
INTRODUCTION
The CORE is the heart of your AGITO Modular Dolly System, within this module is contained all of the
power management, RF and steering drivers.
CORE DIMENSIONS
BATTERY SLOTS
The Battery Connection uses our own proprietry 48v Li-Ion battery packs. Only Motion Impossible
approved battery packs should be used to prevent damage to the system.
The system can run off a single battery, but for optimum runtime the chassis should be fitted with 2
batteries, fitted one on each side, that can be hot swapped to keep the system fully powered during a
battery change. Always make sure to run batteries of the same charge level to ensure optimum
runtimes.
Although the core can power up and down almost instantly, if you are powering accessories from the
12v chassis power outputs then they will also receive uninterrupted power during a battery change
using the hot-swap method.
380m
m
460mm
110mm
16x 3/8” threaded 1 inch/25.4mm pitch
