AGITO
12
www.Motion-Impossible.com
Motion Impossible Ltd.
AGITO Owners’ Manual v1.3 Firmware r4.13
12
+44 1454 501010
CORE RF MODULE SOCKET
The system by default comes with a 2.4 GHz system. The RF module is fixed via a single bolt, simply
unscrew this to remove the RF and swap for other RF modules (sold separately) when required.
If required a Pass-Through module is also available which enables the use of third-party solutions. This
unit provides (see rear of manual for pinouts):
•
Data (RS-232)
•
12v Power (1A max)
CORE I/O PORTS
•
2x 12v DC Outputs – 4 Pin XLR connectors with a shared 2A load, only designed for
lightweight accessories that draw low power, such as RF or video transmission.
•
USB Connector – Not in Use (for future expansion).
•
2x AUX Ports – Wired for multiple interface types. Some of our accessories utilise this
connectivity. AUX1 is also the port you use to update the software in the chassis when new
improvements are released.
PAYLOAD MOUNTING
•
Payload mounting is provided via the 2 mounting rails on each side of the chassis.
The threaded holes are 3/8 inch spaced at 1-inch intervals. These allow for the fitting
of all our current and future stabilisation / camera mounting solutions.
Please ensure you use the correct RF module for your territory, we provide a range of
options. Please contact us for more information.
