Mosaic Palette 3, Manual

Page: 62 / 74

Step 6 — Evaluating Calibration and Next Steps
(Connected and Accessory)
Monitoring calibration: To view calibration pings while a print is in progress, go to Tools > Pings
from Palette's screen.


See "What are Pinging and Ponging " on the next [age
Reviewing print after completion: If the loading offset for the printer is accurate, the first
transition on the tower will appear approximately 30-40% from the bottom-right. The keychain will
have a clean border from the interior section.

Troubleshooting loading offset from first print: In the event you find that transitions are
happening too early or too late, it's possible that the loading offset for the printer profile
is
inaccurate. To learn how to adjust this, please see this guid
e (mm3d.co/p3-lo-hm)
.

Next prints and tuning printer profile: The next set of multi-material prints
( mm3d.co/
thingiverse)
completed with this same printer profile will be further tuned by selecting to save or
ignore the print based on pings and calibration data.

Example multi-material models for profile tuning can be items like coasters, small animals or
figurines.

© 2022 support.mosaicmfg.com/
Accessory Mode with Palette 3
62 of 74