Step 6 — Select Material Profile for Active Drives in a Project
Go to
to either start a new project or open an existing project.
The toolbox on the left has color swatches that correspond to an input drive on Palette 3 (Pro).
If you do not see multiple color swatches, please to go
to check
that you have a printer profile with your Palette model added. Please see
Printing with the same material: When returning to the project, on the toolbox click on a color
swatch to check that the right material profile is selected for each drive.
In this example, drives 1 (white) and 2 (black) are of the same material but different colors will
be loaded into Palette. If any remaining drives are used for this print, please ensure the material
profile is also selected.
Drives 1 and 2 will use the one set of splice tuning values saved for the Shiny New PLA profile
saved in the last step.
Printing with different materials: Click on a color swatch to select the right material profile for
each drive.
In this example, drive 1 (white) is still using the Shiny New PLA profile like above, but drive 2
(black) will be using the Matte PLA profile. Select the intended material profile to be used for
any remaining drives.
Because we have two different material profiles selected for drives 1 and 2, any splices between
these two drives will use the two sets of splice tuning values saved between Shiny New PLA
and Matte PLA in the last step. This includes the default order, and the reverse material order.
Splice Tuning for Palette 3
48 of 74
