Step 4 — Select the Outgoing tube length you will be using to connect to the printer’s
extruder.
The short tube is ideal for printers using a Bowden tube. The medium tube is ideal for most Palette
and printer setups. The long tube can be used if Palette is mounted above the printer.
Using a shorter tube when possible can allow for calibration adjustments to appear sooner while
printing, due to the lesser distance the filament has to travel.
The long tube mainly used for large printers where positioning requires the extra length.
If you are using your own tube, please enter the measurement as a custom length.
Insert the outgoing tube through the output, and make sure the tube sits flush to the brass
coupling.
Before printing, please ensure that the tube is pushed all the way down to brass coupling.
Printer Setup
40 of 74
