When to Save Calibration Values
Introduction
When your print is complete it is important to save the calibration values to improve
your printer profile on Palette.
You can save the calibration values by using the print feedback at the end of each
print will by tapping on the Great or Issues buttons. We recommend using the print
feedback for the first 3-5 prints on a printer. This will allow you to improve your
prints over time.
By tapping on "Great," this will save the calibration data. This will improve the HM
(historical modifier) for your printer profile, and future prints.
The Historical Modifier (HM) is a percentage that tells Palette how much filament to
make based on your printer's extrusion. For example, if your HM is 98%, your printer
may under-extrude slightly when compared to the GCode, and Palette compensates
by adjusting splice length.
73 of 74
