Mortara T12, User Manual

Page: 36 / 54

SECTION 2
16
Main Menu
During patient monitoring, the T12/T12S displays the following information:

SPO2
► (applies to T12S only)

Battery Symbol = 100%, 75%, 50%, or 25% battery charge

Ch:XX
= Transmission channel

Patient ID (if entered; applies to T12S only)

RL, RA, LL, LA, V1, V2, V3, V4, V5
, and/or
V6
= Leads in fail

SpO2 Fault messages
(applies to T12S only)

MENU
►
Press
Up
to view the SpO
2
spot check. The screen will display the oxygen saturation percentage and pulse rate
values that the pulse oximetry sensor is acquiring and transmitting to the receiving device. The values will display
for 3 seconds. The user can select the SpO
2
spot check at any time during transmission.
Press
Down
to enter the user MENU.
To send a
Call
signal, press the button on the front of the device.
CALL
will briefly appear on the LCD display to
notify the user that a call signal has been transmitted.
An operational flowchart of menu options depicts the flow of functionality:
Use the
Up/Down
buttons to navigate to a main menu option; press
Call
to select. When finished, press
Call
to
return to the main menu options.
To return to the main menu, navigate to
DONE
and press
Call
.