SECTION 6
35
WLAN MAC
Shows the MAC address of the ELI 10 Rx wireless module for configuring access points.
WPA-PSK
WPA-PSK (Pre-Shared Key) security allows for implementation of the “personal mode of WPA.” This mode of
encryption employs Temporal Key Integrity Protocol (TKIP) which dynamically changes keys as the system is used.
PSK Passphrase
The passphrase may be from eight to 63 ASCII characters or 64 hexadecimal digits (256 bits).
WPA-LEAP
Cisco® LEAP (Light Extensible Authorization Protocol) enables use of the device with wireless networks
employing the LEAP encryption protocol.
LEAP User Name
The LEAP user name can be up to 64 characters in length.
LEAP Password
The LEAP password can contain up to 64 characters.
Access Point Name
The access point name can contain up to 64 characters.
GSM/GPRS Mobile Transmission (U.S. vs. non-U.S. may differ)
For a GSM/GPRS transmission, set the Comm. Media to GSM/GPRS in the configuration, confirm a valid
telephone number in the configuration, and install your SIM card.
NOTE: The GSM SIM card must be configured for Circuit Switched Data (CSD) capabilities.
Access Point Name
The access point name can contain up to 64 characters. See Appendix C for a complete list of worldwide wireless
access points (WAP).
SIM Card Installation
Power off the ELI 10 Rx. Open the battery cover on the back of the device by removing the Phillips screw.
To insert the SIM card, hold the SIM card so the metal contacts are downward. Slide the SIM card into the socket.
The angled corner should still be visible after insertion.
NOTE: Ensure SIM card is fully seated in socket. Do not force.
Summary of Contents for ELI 10 Rx
Page 14: ...USER SAFETY INFORMATION xii...
Page 18: ...GENERAL CARE xvi...
Page 42: ...SECTION 3 18...
Page 68: ...APPENDIX B 44...