Mortara ELI 10 Rx, User Manual, Page: 57 / 72

SECTION 6
33
DHCP
Defines whether the DHCP will be used to obtain an IP address. If DHCP is YES, the network will automatically
and dynamically assign an IP address; therefore, there is no need to manually enter an IP address. If DHCP is NO,
you must enter the IP address, def gateway, and sub net mask.
NOTE: All parameters related to network connection must be entered under the direction of the IT
Manager of the facility where the unit is installed.
IP Address
Enter the fixed IP address for network transmission (if DHCP is not selected).
Def Gateway
Enter the address of the default gateway (if DHCP is not selected).
Sub Net Mask
Enter the sub net address (if DHCP is not selected).
Host IP
Enter the IP address of the host server.
NOTE: Addresses are always entered as 4 sets of 3 digits; therefore, an address of 192.168.0.7 must be
entered on the ELI 10 Rx as 192.168.000.007.
Port Number
Enter the port number used by the host server.
LAN MAC
Enter the port number used by the host server.
WLAN Transmission
For a WLAN transmission, set the default Comm. media to WLAN. It is necessary that the IT Manager of your
facility configure the wireless access point(s) and E-Scribe workstation. It is also required that your IT Manager
provide the ELI 10 Rx WLAN configuration values. The ELI 10 Rx can be configured for Dynamic Host
Communication Protocol (DHCP) or static IP. Wireless security encryption options include Wired Equivalent
Privacy (WEP), Wi-Fi Protected Access (WPA), and LEAP.
NOTE: Environmental conditions may affect the reliability of WLAN transmissions.