Page 23
SYSTEM
FIG 10.1
Set Feed
The length of suction on the sheet of paper being fed can be adjusted by setting the feed
type as follows:-
Select 1 for short suck, select 2 for continuous suck (stream feeding).
1.
will give the quickest through put of stock through the machine.
2. When the first crease is less than 37mm from the leading edge of the paper the feed will
be noticeably slower when using speeds 2 and 3.
3. When the first crease is less than 50mm from the leading edge of the paper the feed will
be noticeably slower when using speed 3.
NOTES.
Stream Feed
Operating the Autocreaser Pro 50
AutoCreaser Pro 50
Vacuum Suck
Select 1 for short suck
Select 2 for continuous suck
(Stream feeding)
