Page 26
CREASING
Operating the Autocreaser Pro 50
Programming the machine
Storing the Job
1.
Switch the power ‘on’ by turning the Emergency stop button clockwise
to release the safety latch.
2.
Set the page length of the paper as described on page 10.
3.
Set the vacuum suck as described on page 10. Setting number 1 for short suck and
setting number 2 for continuous suck (stream feed).
4.
Select the
button. On selection the status area is replaced with a calculator for
inputting new values.
5. (i) Select the lower tab
or
from the status area to get to the
Crease Settings Page.
(ii) Set the creases as described on pages 11 and 12.
6.
The job that has been set can now be stored as follows.
(i) Select the lower tab
or
from the status area to get to the
Store Settings Page.
(ii) The job can be given a name and stored as described below. You can also retrieve
previously saved jobs, modify them or delete jobs that are no longer required.
Setting the page length
Setting the vacuum suck
Setting the batch quantity
Setting the crease positions
To create a new job name click in text area &
keyboard will open to input job name.
Load existing job from
store
Clicking to search
currently stored jobs
Clicking to delete
currently stored jobs
Clicking to save job
shown.
Current Job Name
Yellow Text Denotes Saved Job
Red Text Denotes Unsaved Job
