Page 18
CREASING
Quick Start Guide
Tools Screen
Clean Lead Edge Sensor
Clicking this icon will
show Machine
program revision &
Touch Screen
software revision.
Inch paper in direction
of arrow to clear jams
Click on Up Arrow to
put Anvil into Top
Dead Centre position
(TDC)
Inch paper in direction
of arrow to clear jams
Main Processor Program
version
Touch screen software
version
Machine Speed Adjustment:-
Speed setting 3 will give the fastest throughput of
stock through the machine.
Use speed setting 1 or 2 for troublesome stocks,
or to synchronise the speed of the AutoCreaser to a
Morgana Autofold Pro, when they are used together.
Touch Screen Calibration
Change Machine measurement
settings, Imperial / Metric
See Page 19
