7
Rev. 1.0
8/26/2015
TSM11 Hardware Manual
2 Getting Started
The following items are needed:
•
A 15-30 volt DC power supply (24VDC is recommended), “Choosing a Power Supply” for help
in choosing the right one
•
Download
Step-Servo Quick Tuner
software from MOONS’ website
•
A PC running Windows XP, Vista, Windows 7 or Windows 8 (32-bit or 64-bit)
•
A mating cable(for power, I/O and communication connection, included in package)
•
A RS-485 converter
2.1 Installing Software
Before utilizing the TSM11 Integrated Motor and Step-Servo Quick Tuner Software in an
application, the following steps are necessary:
•
Install the Step-Servo Quick Tuner
•
Launch the software by clicking Start Step-Servo Quick Tuner software...Programs...MOONS’.
•
Connect the drive to the PC using RS-422/485, it is recommended to set up in a 4-Wire
configuration (see “Connecting to a host using RS-422/485” below.)
•
Connect the drive to the power supply. See instructions below.
•
Apply power to the drive.
• The software will recognize the drive and display the model and firmware version. At this point,
it is ready
2.2 Mounting Hardware
As with any integrated motor, the TSM11 must be mounted so as to provide maximum heat sinking
and airflow. Keep enough space around the Integrated Motor to allow for airflow.
• Never use the TSM11 where there is no airflow or where other devices cause the
surrounding air to be more than 40°C (104°F).
•
Never put the TSM11 where it can get wet.
•
Never use the TSM11 where metal or other electrically conductive particles can
infiltrate the TSM11.
• Always provide airflow around the TSM11.
