Moog Components Group
Mini4, Rev C
February 23, 2009
(201580-xxx And 201590-xxx)
Page 7 of 19
(Red/Green)
received into the board on channel 1, Red is ‘ON’ when serial data is being
transmitted out of the board on channel 1.
FUSES:
a 2.6A PTC fuse, F3, protects the +5VDC input to the board.
NOTE: the fuse is a positive temperature coefficient self-resetting fuse and does not require
replacement
SWITCHES: There are no switches on the Video Input board.
CONNECTORS: The connectors on the Video Input board are as follows:
J2
Daughterboard Connector
VDC Supply
1 o o 2
VDC Supply
RXD_DB
3 o o 4
TXD_DB
GND
5 o o 6
GND
RXC_DB
7 o o 8
TXC_DB
RCV LINK
9 o o 10
Future
J3
Power /Diagnostics
RT+
1 o o 2
RT-
GND
3 o o 4
GND
GND
5 o o 6
GND
+5V
7 o o 8
+5V
+5V
9 o o 10
+5V
J5
Serial Data
R1
1 o o 2
T1
GND_ISO_A
3 o o 4
GND_ISO_A
R2
5 o o 6
T2
R3
7 o o 8
T3
GND_ISO_B
9 o o 10
GND_ISO_B
R4
11 o o 12
T4
R5+
13 o o 14
T5+
R5-
15 o o 16
T5-
GND_ISO_C
17 o o 18
GND_ISO_C
R6+
19 o o 20
T6+
R6-
21 o o 22
T6-
No Connect
23 o o 24
No Connect
NOTE: J5 header is located at the upper left side of the board.
Pin 1 is the bottom right pin – as identified by a square pad.
J6
+5DC Power entry