Moog Components Group
Mini4, Rev C
February 23, 2009
(201580-xxx And 201590-xxx)
Page 3 of 19
1
Mini4 Video Input with SFP Board P/N – 201580-xxx and Mini4
Video Output with SFP Board P/N – 201590-xxx
The Mini4 (M4) Video Input and Output boards are used as a set; the Input Board is used at the system
location where the video sources are located while the Video Output board is connected to the video
monitor located at the system location where the video is to be displayed. These boards are essentially
functionally identical with respect to data functions and the only difference is the input/output
functions related to the video. This board set provides for 4 video channels, RS232 data channels and
RS422/RS485 data channel. In addition, the M4 Video Input and Output boards provide for the use of
one or more daughter boards for additional data channels.
NOTE: For details on a specific daughter board, refer to the daughter board manual. For a current
list of available daughter cards, please contact the factory sales personnel.
1.1
Mini4 Video Input and Output Board Revision History
:
The Mini4 Video Input board (201580-xxx) has gone through the following printed circuit board (PCB)
revisions:
PCB Revision A
Original design, not currently in production.
PCB Revision B
Respin to correct routing, not currently in production.
PCB Revision C
Respin to correct routing, not currently in production.
PCB Revision D
Respin to change serial data optocouplers, increase data connector, change
video connector footprint, change video LEDs
The Mini4 Video Output board (201590-xxx) has gone through the following printed circuit board (PCB)
revisions:
PCB Revision A
Original design, not currently in production.
PCB Revision B
Respin to correct routing, not currently in production.
PCB Revision C
Respin to change serial data optocouplers, increase data connector, change
video connector footprint, change video LEDs
1.2
Mini4 Video Input and Output Board Dash (-) Number Definitions
:
The M4 Video Input and Output boards have a Dash Number appended to the part number. This Dash
Number identifies the specific board configurations. -001A standard configuration.
1.3
Mini4 Video Input and Output Board Operation
The M4 Video Input and Output boards include the fiber optic link interface, 4 channels of video with 10-
bit analog-to-digital conversion, 4 channels of RS-232 data and 2 channel of RS-485 or RS-422 data. The
boards interface to all of the on-board peripheral devices (such as the fiber optic link chips (SERDES), the
