PARISON CONTROLLER
moog
104
MAN145-UM-D01A-EN
Moog Italiana srl - Bergamo
4.18.2 List of the alarms.
[001] PARISON CONTROLLER not Configured.
Active if in the Setup Machine Page there is nothing selected in "
Function of machine
." In practice
to the startup, when the machine is not configured.
[002] Head 1 not calibrated.
Active if without feedback actuator the limits of calibration are equal (
V. Up
and
V. Down
at Setup 1
Head 1 Page).
[003] Head 2 not calibrated.
Active if without feedback actuator the limits of calibration are equal (
V. Up
and
V. Down
at Setup 1
Head 2 Page).
[004] Head 3 not calibrated.
Active if without feedback actuator the limits of calibration are equal (
V. Up
and
V. Down
at Setup 1
Head 3 Page).
[005] Head 4 not calibrated.
Active if without feedback actuator the limits of calibration are equal (
V. Up
and
V. Down
at Setup 1
Head 4 Page).
[006] Accumulator not calibrated.
Active if in Setup Machine Page Function of the machine is set in
Accumulator Position
and the
limits of calibration are equal (
V. Full
and
V. Empty
at Setup Accumulator Page).
[007] Extruder 1 not calibrated.
Active if in Extruder setup 1 Page (if Extruder 1 is present in Setup Machine Page) with Analogical
Extruder Type:
the limits of input calibration are equal (
Minimum Voltage
and
Maximum Voltage
);
the
Velocity with V max
is 0 rpm;
the
Vel. Min Planned
and
Vel. Max Planned
are equal;
the
Maximum Velocity
(output calibration) is 0 mV;
the
Voltage/Current with max Velocity
is 0 mV.
With Digital Extruder Type:
the
Maximum
Duration Inc/Dec
is 0 ms.
[008] Extruder 2 not calibrated.
Active if in Extruder setup 2 Page (if Extruder 2 is present in Setup Machine Page) with Analogical
Extruder Type:
the limits of input calibration are equal (
Minimum Voltage
and
Maximum Voltage
);
the
Velocity with V max
is 0 rpm;
the
Vel. Min Planned
and
Vel. Max Planned
are equal;
the
Maximum Velocity
(output calibration) is 0 mV;
the
Voltage/Current with max Velocity
is 0 mV.
With Digital Extruder Type:
the
Maximum
Duration Inc/Dec
is 0 ms.
[021] Temperature not OK.
Active if the Digital Input number 10
Temperature OK
is OFF.
Summary of Contents for IMI220-145D001
