www.Deuba24online.de
www.Deuba24online.de
INSTRUCTIONS FOR USE
1. When using the appliance, make sure that it is on a flat and stable surface. Damage may occur if it is
placed on an incline or decline and put the ice box into water tank:
2. Insert the plug directly into a standard AC
socket-outlet. Be sure plug fits tightly into outlet.
Now the power pilot light will light on.
3. ON/OFF button
Press the button ON/OFF to start the fan
Note: the default fan speed and fan mode is Me
-
dium and Normal when press ON/OFF one time.
4. SPEED button
Press the SPEED button to set the desired fan
speed (Low/ Medium/ High).
As per the following sequence: MI HI Lo MI.
The fan speed selecting can be circulated and the
speed pilot lamp will be on during the fan operat
-
ing.
5. SWING button
If you want to enlarge blast area in your room,
press the SWING button, the fan will blast your
room in large scope; the SWING light will be illu
-
minated. To stop SWING, just press the SWING
8. COOL button
Please noted that the COOL LAMP will flashing
when you press the Cool button if there is no or
lacked water in water tank.
8-1 Before operating the unit in Cool mode, make
sure the escape valve for the water tank is prop
-
erly fixed. Then proceed to add clean water into
the water tank. While adding the water, make
sure that you keep an eye on the water level
indicator to make sure that you do not OVER or
UNDER FILL the unit. Press the button Cool after
you have added the water and the unit should
commence to blow cooler air. The cool light will
light on at the same time. When you press the
button Cool again, it will stop working, the cool
light will also go out.
8-2 If you find that the air after Step 1) is still not
cool enough, you can add additional ice block
into the water tank directly by opening the water
tank cover. Be sure not to exceed the icebox ca
-
pacity otherwise damage to the unit or electric
shock may occur.
8-3 If you wish to use an Ice box instead of ice
block, just place it directly into the tank by open
-
ing the water door. It will be good cooling effi
-
ciency if you place it in your refrigerator and let
the ice pack freeze for 1 to 2 hours.
8-4 You may complete pull out water tank, then
replace water in the water tank or clean water
tank,
8-5 Under the cooling work condition, the appli
-
ance will delay 5 minutes to stop working when
you shut off the unit or timing finished, during
the extended period, the timer pilot lamp is
flashed.
9. ANION button
To gain fresh air in your room, just press ANION
button and the build-in ionizer will operate.
1
0
.The function of above item can be carried out
with your remote control by pressing the corre
-
sponding function button. The buttons on the
remote control are identical with the buttons on
the control panel. The remote control can work
with a distance of within 6 meters and an angle
about 20 degrees. Furniture and other objects
between the RC sender and receiver may affect
signal transmission and reduce the range.
Insert 2 AAA batteries into the remote control
(not in scope of delivery).
12. How to knock down the dust-proof bracket
and honeycomb filter.
1) Pull out the dust-proof bracket.
2) Rotate the knobs outwards like left image.
3) Take up the honeycomb filter.
13. To turn off the unit just press the button OFF.
14. To completely shut the unit off, turn all the
controls to OFF, and remove plug from the sock
-
et-outlet.
button again, the SWING pilot light will go out.
Moving the horizontal louvers either up or down
can make further wind direction enhancements.
6. TIMER button
Set the time by pressing the timer button to
select a desired timing level as follow, the
range is between 1-9 hours. The pilot light
corresponding to the selected timing level will
be illuminated.
7. MODE button
The default setting is Normal wind, and then
you can press the button Mode again to
choose your desired wind mode as per the
following sequence:
NORMAL NATURAL SLEEP
The wind mode selecting can be circulated
and the wind mode pilot lamp will be on
during the fan mode in operating.
12
13
1
3
2
1.Rotate the small knob updowm.
3.Add the water from here into water tank
4.Put ices into ice basket
2.Pull out the water tank
5.Put the ice box also into water tank
