Monterey Sport Cruiser 260SCR, Owner'S Manual

Page: 7 / 212

Section 1
1-2
Cruiser
ABOUT YOUR NEW BOAT
Boat Terminology
It is important that you understand, learn and use
appropriate and common nautical terminology
while boating to ensure your safety and the safety
of others.
Figure 1-1
Figure 1-1
See the Glossary of Nautical Terms on page 13-1
for additional boating terminology.
Hull Identification, Capacity
and Safety Plates
Hull Identification Number
The hull identification number (HIN) is usually
located near the upper starboard corner of the
transom on the outside of the boat. In some
instances, the HIN may be located in an alternate
location as determined by the manufacturer. The
HIN must be clearly visible and may not be
removed, altered or tampered with in any way as
regulated by federal law.
In case of collision, theft or damage, report these
numbers to the local authorities, your insurance
agent and your dealer.
Safeguard information about your boat by
recording the HIN and model of your boat, and
model and serial numbers of the engine, trailer
and accessories on the
Boat Information Form on
page 1-6 .
U.S. Coast Guard Safety Standards
Compliance Plate
All power boats less than 20 feet (6 meters) must
have a manufacturer’s compliance plate clearly
indicating that your boat is in compliance with the
USCG safety standards and the effective date of
the compliance. The compliance plate may be
AFT FORWARD
HELM
BEAM
LENGTH OVERALL (LOA)
PORT SIDE
STARBOARD SIDE
RADAR ARCH
GUNWALE
KC-0002-A
WATERLINE
BOW
BOW
PULPIT
FREEBOARD
DRAFT
STERN
TRANSOM