MONTAGUE E136W36, Instructional Manual, Page: 27 / 40

27
7. Light pilot
8. Reinstall the control panel cover and control
valve knobs.
9. Turn burner valve full on and check that burner
is properly lit.
Figure 10. Burner Valve
CARRIAGE POSITION HANDLE
The carriage position handle consists of the parts
shown in the following illustration and parts list.
Figure 11. Carriage Position Handle
Item Part No. Description Qty
A 02033-8 Knob, Black ball 1
B 32756-5 Compression Spring 1
C 03503-3 Gear & Tube Assembly 1
D 03506-8 Stud, Threaded 1
E 03504-1 Sleeve, Chrome 1
F 14442-8 Handle Bracket 1
Black Ball Knob
1. Remove the black ball knob by unscrewing it
(counterclockwise) from the threaded stud.
2. Replace the black ball knob by screwing it
(clockwise) onto the threaded stud.
Chrome Sleeve
1. Turn off the burners.
2. Allow the broiler to cool to room temperature.
3. Remove the black ball knob by unscrewing it
(counterclockwise) from the threaded stud.
4. Remove the sleeve from the tube/threaded stud
assembly.
5. Replace the chrome sleeve by placing the
s sleeve onto the threaded stud.
Threaded Stud
1. Turn off the burners.
2. Allow the broiler to cool to room temperature.
3. Remove the black ball knob by unscrewing it
(counterclockwise) from the threaded stud.
4. Remove the chrome sleeve from the tube/
threaded stud assembly.
5. Unscrew the threaded stud from the tube.
6. Reinstall the threaded stud by performing the
above steps in reverse order. Screw the
threaded stud about 1‖ into the threaded end of
the tube.
Gear and Tube Assembly
1. Turn off the burners.
2. Allow the broiler to cool to room temperature.
3. Remove the black ball knob by unscrewing it
(counterclockwise) from the threaded stud.
4. Remove the chrome sleeve.
5. Unscrew the threaded stud from the tube.
6. Remove gear with bracket from the cabinet
frame.
7. Slide the gear and tube assembly off the
carriage position handle arm.
8. Replace the gear and tube assembly by
p performing the above steps in reverse order.