MONTAGUE E136W36, Instructional Manual, Page: 12 / 40

12
OVEN MINIMUM FLAME SETTING
This is the flame that must be maintained on the burner when the oven has come up to the
temperature set on the dial. Enough gas must be bypassed by the control to keep the entire burner
lit. The thermostat regulates the flame from high to low in accordance with the oven temperature
and will automatically turn down to this minimum flame when the temperature set on the dial is
attained in the oven.
1. Light the oven, set thermostat to 100°C and allow 5 minutes for the oven temperature to
stabilize.
2. After oven temperature rises and remains constant, turn dial back to low. This closes the main
valve and permits only the bypass gas to the burner.
3. Remove dial.
4. With a screwdriver, turn the bypass flame adjustor screw counterclockwise to increase the
bypass flame or clockwise to decrease it until the flame over the entire burner is approximately
4mm high. Replace dial.
P/N 01061-8