background image

MST13003 / MST13004 / MST13005 

09/16/14

This is the safety alert symbol. It is used to alert you to 
potential personal injury hazards. Obey all safety messages 
that follow this symbol to avoid possible injury or death.

 

           

 

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THESE JACKS, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING  

PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.

It is the responsibility of the owner to make sure all personnel read this manual prior to using these jacks. It is also the responsibility of 
the jack owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost 
or not legible, contact Monster for replacements. If the operator is not fluent in English, the product and safety instructions shall be 
read to and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that 
the operator comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

The use of bottle jacks is subject to certain hazards that cannot be prevented by mechanical means, but only by the exercise of 
intelligence, care, and common sense. It is essential to have personnel involved in the use and operation of the jack who are careful, 
competent, trained, and qualified in the safe operation of the jack and its proper use when servicing motor vehicles and their com-
ponents. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, overloading, 
off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not intended.

METHODS TO AVOID HAZARDOUS SITUATIONS

 

•   Read, study, understand and follow all instructions before operating this device.

 

•  Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking hydraulic fluid, 

 

  or unstable due to loose or  missing components. Make corrections before using.

 

•   Lift only at points of the vehicle specified by the vehicle manufacturer.

 

•   Users and bystanders must wear eye protection that meets ANSI Z87.1 and OSHA standards.

 

•   Do not use jack beyond its rated capacity.

 

•   No persons should be under a vehicle when jack is in use.

 

•   This is a lifting device only. Immediately after lifting, support the vehicle with jack stands capable of sustaining the load  

 

  before working on the vehicle.

 

•   Use only on a hard level surface.

 

•  No alterations shall be made to this product.

 

•   Center load on saddle. Be sure setup is stable before working on vehicle.

 

•   Do not use saddle adaptors or saddle extenders between the stock lifting saddle and the load.

 

•   Always lower the jack slowly and carefully.

 

•   This product may contain one or more chemicals known to the State of California to cause cancer and birth defects 

 

  or other reproductive harm. 

Wash hands thoroughly after handling.

 

•   Failure to heed these warnings may result in serious or fatal personal injury and/or property damage. 

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS,  
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS  
SITUATIONS could cause accidents resulting in serious or fatal personal injury and/or property damage.

WARNING: Indicates a hazardous situation 
which, if not avoided, could result in death 
or serious injury.

WARNING

WARNING

WARNING

WARNING

WARNING INFORMATION

Summary of Contents for MST13003























Reviews: