22
14.
Reinstall the brush onto the retaining clips on the Dust Bin lid.
15.
Reinstall the HEPA filter onto the side of the Dust Bin.
16.
Insert the Dust Bin into the vacuum.
17.
Close the lid, then press the
area to latch it into place.
Note: If you notice a loss in suction power, the HEPA filter may need to be
cleaned with warm water. The HEPA filter should be replaced after two washes
with water.
Clean the Side Brushes
After each use, inspect the side brushes and clean as necessary. Replace the side
brushes when they are damaged after 12 months, whichever comes first. When
replacing the brushes, match the L/R markings on the brushes with the L/R markings on
the bottom of the vacuum.
Cleaning Sensors and Wheels
After each use, wipe the sensors and wheels clean with a soft,
dry cloth, at the indicated locations.
Cleaning the Charging Poles
Periodically wipe the charging poles clean on the
Charging Station and Vacuum with a soft, dry cloth.