14
OPERATION
Power On/Off
Flip the Power Switch on the right side of the vacuum to power it on or off.
While powered on and not in actual operation, the vacuum can be placed in
Sleep or Standby mode.
Standby and Sleep Modes
The vacuum must be powered on to enter Standby or Sleep mode.
The LED display is illuminated when the vacuum is in Standby mode and is off
when it is in Sleep mode.
When the vacuum is in Sleep mode, press the
button on the vacuum or the
ON/OFF button on the remote control once to enter Standby mode.
While cleaning is in progress, press the
button the vacuum or the ON/OFF
button on the remote control to enter Standby mode.
When the vacuum is in Standby mode, press and hold the
button for about
three seconds to enter Sleep mode.
When the vacuum is in Standby mode, it will automatically enter Sleep mode if
no buttons are pressed for 60 seconds.
Cleaning
Perform the following steps to manually begin cleaning.
1.
Ensure that the Power Switch on the side of the vacuum is in the on position.
2.
Press the
button on the vacuum to enter Standby mode. If the vacuum is on
the charger it will begin cleaning right away in Normal Cleaning mode.
Otherwise, press the
button again to begin cleaning.
3.
While cleaning is in progress, use the remote control to control the vacuum's
cleaning behavior.
