16
by pressing the SPOT button on the remote control. You can also select Spot
Cleaning mode by pressing the MODE button on the remote control to cycle
through the four cleaning modes. The LED Panel will show 1111 when in Spot
Cleaning mode.
3.
Edge Cleaning: The Edge Cleaning mode is
designed to clean along a wall or around other
obstacles. The vacuum will automatically enter
Edge Cleaning mode when it encounters a wall
or other obstacle. You can manually select
Edge Cleaning mode by pressing the
button on the vacuum. You can also select Edge
Cleaning mode by pressing the MODE button on the remote control to cycle
through the four cleaning modes. The LED Panel will show 3333 when in Edge
Cleaning mode.
4.
Zig-Zag Cleaning: The Zig-Zag Cleaning mode
is one in which the vacuum uses long, parallel
cleaning paths. The vacuum automatically
enters Zig-Zag Cleaning mode whenever it
detects a large, open area. You can manually
select the Zig-Zag Cleaning mode by pressing
the
button on the
vacuum. You can also select Zig-Zag Cleaning mode by pressing the MODE
button on the remote control to cycle through the four cleaning modes. The
LED Panel will show 4444 when in Zig-Zag Cleaning mode.
