17
SCHEDULING
Setting the Clock
Prior to scheduling, the vacuum's clock should be set to the current time. Perform the
following steps to set the clock.
1.
Ensure that the vacuum is in Standby mode or is charging. If it is in Sleep mode,
press the
button on the vacuum to enter Standby mode. If the vacuum is
actively cleaning, press the ON/OFF button on the remote control to stop
cleaning and enter Standby mode.
2.
Press the
button on the vacuum to enter Clock Setting mode. The
clock's hour display will start to flash.
3.
Press the
button on the vacuum to increase the hour value or
press the
button on the vacuum to decrease it.
4.
Press the
button on the vacuum to confirm the hour setting. The clock's
minute display will start flashing.
5.
Press the
button on the vacuum to increase the minute value or
press the
button on the vacuum to decrease it.
6.
Press the
button on the vacuum to confirm the minute setting.
7.
Press the
button on the vacuum to exit Clock Setting mode.
Setting the Scheduled Time
Perform the following steps to set the time at which the vacuum will begin automatic
cleaning.
1.
Ensure that the vacuum is in Standby mode or is charging. If it is in Sleep mode,
press the
button on the vacuum to enter Standby mode. If the vacuum is
actively cleaning, press the
button on the remote control to stop cleaning
and enter Standby mode.
2.
If the clock has not yet been set, set it by following the instructions in the
Setting the Clock section.