FG073
– DELTA CONT. RevA17 10-4-17
51
Section 2.
Writing programs on your personal computer (PC).
The program is structured in the same way as the Delta using a number of lines and
commands to describe the motion of the depositor nozzles and ultimately the finished
product.
To insert a program command make an appropriate selection from the
‘command drop menu’ i.e. move, end, speed, suck back etc. The ‘command drop
menu’ is activated by pressing the ‘Insert a move command’ icon
(see figure 1.0).
Please note it may be necessary to first select a box in the program area to
make the menu visible. Once a command has been entered move to the correct
box in the program area using the arrow keys or mouse cursor and enter the
required figures. To amend an existing figure move to the correct box,
backspace and re-enter the figure.
With the core program now written it is important to enter the relevant tray and
template information. To do this point and press the ‘Tray Menu’ button.
(See
figure 1.0)
Note:
Tray and template information, on the Up/Download software are
on the same screen.
Figure 2.0 ‘Tray Menu’ screen
.
To move either arrow key up and down or point directly using your mouse to make a
selection. To make a change delete the current value by pressing backspace and
then enter the preferred value. Once complete close the window by pressing the X
button.
