FG073
– DELTA CONT. RevA17 10-4-17
36
C) Speed set up menu –
Enables default values for maximum speed of each of the DELTA’s four axes,
acceleration values and offset values to be entered. In the absence of any
other speed instruction within the product program the speed values entered
within this menu will be used by the controller to produce machine movements.
From the main menu the
‘SPEED SET UP MENU’
is available from the bottom
RH option area.
This area is unmarked in an attempt to discourage access as, once the
parameters contained within this menu have been factory set they should not
need adjustment, however, they are user accessible.
Press the bottom RH key to the side of the screen leading from the
unmarked
area
to reveal the
‘SPEED SET UP MENU ‘
with the factory set up figures as
shown below: -
Speed deposit
=
120
Speed tray
=
100
Speed jog
=
100
Speed rotary
=
80
Init(ial) tray vel(ocity)
=
30
Max.acc(eleration) lim(it) =
120
Tray acc(eleration) lim(it) =
80
Offset SD Hop
=
0
Offset HD Hop
=
-19
The parameters contained within the ‘Speed set up menu’ have the following effect: -
Fig. 45
