FG073
– DELTA CONT. RevA17 10-4-17
44
7.
Show status
–
Enables an instantaneous readout of the number of cycles (jog counter) of
the DELTA since its first build. The counter cannot be reset and gives an
indication of the DELTA’S use.
Press the key to the side of the screen leading from the ‘Show status’ option to
reveal the screen read out.
8.
Exit to op
(erating)
sys
(tem)
-
Enables the reloading of existing or
loading of new software to the controller from a suitable source using
appropriate communication links (see section on loading new program on the
next page)
Press the key to the side of the screen leading fr
om the ‘
EXIT TO OP
(ERATING)
SYS
(TEM)’ option to reveal the screen shown in fig 56. This screen is at the
highest level -
one level above the DELTA’S main menu (see Fig. 1a and 1b).
Fig. 54
Fig. 55
Fig. 56
