Monarch NICE 5000, User Manual

Page: 188 / 233

7 Description of Function Codes NICE5000 User Manual
- 186 -
Function
Code
Parameter
Name
Setting Range Default Unit Property
FL-17 HCB:JP1 input
1: Elevator lock signal
2: Fire emergency signal
3: Current floor forbidden
4: VIP floor signal
5: Security floor signal
6: Service floor switchover
7: Parking floor switchover
8: Down collective selective switch
9: Peak service switch
10: Fire emergency floor switchover
1 -
★
FL-18 HCB:JP2 input 2 -
★
These parameters are used to set the functions of input terminals on the HCB.
Function
Code
Parameter Name Setting Range Default Unit Property
FL-19 HCB:JP1 output
0: Invalid
1: Up arrival indicator
2: Down arrival indicator
3: Fault output
4: Non-door zone stop output
5: Non-service state output
6: Buzzer output
1 -
★
FL-20 HCB:JP2 output 2 -
★
These parameters are used to set the functions of output terminals on the HCB.
The setting is effective to HCBs at all floors.
Group Fr: Leveling Adjustment Parameters
Function Code Parameter Name Setting Range Default Unit Property
Fr-00 Leveling adjustment function
0: Disabled
1: Enabled
0 -
★
This parameter is used to enable the leveling adjustment function.
Function
Code
Parameter Name Setting Range Default Unit Property
Fr-01 Leveling adjustment record 1
00000–60060
30030 mm
★
Fr-02 Leveling adjustment record 2 30030 mm
★
… …
Fr-28 Leveling adjustment record 28 30030 mm
★