Monaco 2009 Knight, Owner'S Manual

Page: 245 / 260

21
2009
K
night
Chassis Information - 1
0
Greasing:
Thoroughly clean all Zerk grease fittings
before applying new lubricant. Keep paper
towels or disposable rags handy when
greasing. When lubricating items such as drive
shafts and steer axle components, continued
grease application is generally required until
new grease appears at exit points.
Some items use sealed boots around the
component to prevent moisture intrusion.
When greasing these types of components,
care must be given to prevent excess lubricant
pressure from rupturing the seal.
WARNING
Always chock wheels before going
underneath the motorhome.
WARNING
DO NOT allow anyone under the
motorhome without first properly
blocking frame (jackstands) from
coming down in case of rapid deflation
of air system.
Brake actuating components require
lubrication to keep the actuating components
freely operating. Avoid contaminating brake
linings with lubricant. Particular care and
attention to details should be taken when
lubricating brake actuating components. Wheel
removal may be necessary to gain access the
grease fittings.
NOTE
Suspension, steering, brake and
drivetrain components are lubricated
at factory using NLGI 2 Lithium Soap
based grease.
To apply grease:
Clean the grease fitting. Initially
operate grease gun until new lubricant
discharges from nozzle, then wipe
nozzle clean to avoid introducing
contaminants into the component.
Snap nozzle onto grease fitting. Nozzle
must remain in line with the grease
fitting during the application process. If
the nozzle is not in line, lubricant will
collect around nozzle and grease fitting,
failing to lubricate the component.
Wrap the nozzle with a paper towel
or rag to prevent contamination and
accidental soiling of other areas.
If the component does not accept grease the
Zerk fitting may be plugged or damaged. Zerk
fittings are replaceable and generally available
at most auto supply stores. Zerk fittings
come in a variety of angles depending on the
application. Every effort should be made to
lubricate the component, as neglect will only
result in premature component failure.
NOTE
Some grease fittings may not be
accessible until the steering wheel is
turned or the motorhome is moved
slightly.



090368
Typical Zerk Fitting